[Part 2/Transformation Points Explained] 11/14 (Fri) SOUL OF CHOGOKIN Departure! Introducing the "GX-115 SHINKALION E5 HAYABUSA" Product Sample

To celebrate the 10th anniversary of the birth of "Shinkansen Transforming Robot Shinkalion," SOUL OF CHOGOKIN! Shinkalion!

It transforms from Shinkansen mode, which is based on the Shinkansen "E5 Series Hayabusa" Shinkansen train, to Shinkalion mode with the same proportions as in the video.Available in stores from Friday, November 14thBefore it releases, we'll be showing off In the second part, we will introduce the amazing SOUL OF CHOGOKIN x Super Evolution Transformation!We will introduce the products with product samples and original photos!

*The images in this article are of product samples and may differ from the actual product.
*Please refer to the instruction manual for details on the actual product's deformation and movement.

[Part 1/Basic specifications explanation]
シンカンセンモード（変形前）とシンカリオンモード（変形後）の基本仕様は、こちらの前編記事Please refer to.

This item is a two-piece transforming robot with the front car being the upper body and the rear car being the lower body.There are nearly 100 transformation points throughout the body.Therefore, this timeIn the second part, we will introduce the transformation points unique to "SOUL OF CHOGOKIN x Shinkalion"We will continue to do so.

The top priority was​シンカンセンモードとシンカリオンモード、変形前後の両方をイメージ通りに立体化する」ことです。シンカンセンモードでは実車の新幹線「Ｅ５系はやぶさ」そのままに、シンカリオンモードは映像のヒロイックなプロポーションを徹底追求すべく工夫が施されています。

*Some parts use thin crank mechanisms and hinges to move and fold parts (e.g., the image above). This article includes images that have been altered to explain the transformation steps, but due to the delicate transformation structure overall, please refer to the instruction manual for the actual product.

First, let's start with the front car, which is the upper body. It is roughly divided into the head to chest block, shoulder and arm blocks (left and right), and arm armor.

The nose section contains the head, abdomen, and back plate, and the exterior is disassembled into small pieces as it folds forward.It is compressed into the shape of a robot's chest.I can see that.
As mentioned in the first part, the exterior of the Shinkansen mode is made of hard, thin ABS, so large blocks such as the head can be stored inside and pulled out with very little clearance."Transformation without replacement"We have achieved this.

The base of both shoulders細かい外装分割×水平・垂直が交叉する変形機構の組み合わせで、パズルのようにパーツ同士の干渉を避けながらまとめていく構造となっています。
The shoulders transform by dividing the armor into separate pieces and folding them up with an internal crank mechanism. The armor on the entire body can be firmly fixed in place with concave and convex pins once transformed correctly.

Expose the convex parts at the base of both shoulders and the concave parts on the torso, two on each side, and fit them together to complete the upper body!
By sliding the bumps on the top, the stability of the combined arms is further increased.

When the exterior of the rear car is removed, it becomes the entire body from the waist to both legs. By adjusting the hip joints, it can be opened 180 degrees (see image above), and at that point the total length is over 400mm!
*Updated November 7th: The figures have been corrected due to an error.

We also considered transforming this item into a single unit without separating the upper and lower body. However, due to the aforementioned need to maintain the proportions both before and after transformation, and the need for a large open transformation and delicate mechanism,Avoid "loading other parts during deformation" and "difficult to hold and deform"Therefore, it has been transformed into a two-piece upper and lower body.

What is noteworthy about the lower body"Thigh-inflating gimmick"In the video, it is arranged to be a little thicker, and a gimmick has been added that makes the thighs bulge on both sides based on the anime design (see image above). This gives the legs more definition and enhances the image of an "anime-style robot."

This item is made of hard ABS exterior and die-cast parts that require strength, such as joints."We've maximized the benefits of each material."However, the attention to item that is characteristic of SOUL OF CHOGOKIN extends to the finer details.
For example, when pulling out the ankle block and lifting the knee and shin armor, you can slide the inner part to hide the gap at the ankle (see image above). It's a small gimmick, but it has a big effect as a finishing touch to the well-balanced extended legs.

Combine the upper and lower body and change! Shinkalion!
We are still focusing on this stage!!

Going beyond the reproduction of the transformation sequence, we wanted to give you a "cool Shinkalion just like in the video" in your hands.Adjusted so that the chest-puffing posture is natural when the transformation is completeis added.

Also, while it was originally designed to be 200-220mm tall, it was enlarged to the current height of approximately 260mm because the strength of the parts at their thinnest was insufficient."Enjoy the delicate transformation process, and once completed, you can play with it just like a non-transforming model" SOUL OF CHOGOKIN Shinkalion is bornDid.

Also, Takara Tomy's "Shinkansen Henkei Robo Shinkalion" 10th anniversary commemorative itemプラレール「新幹線変形ロボ 10周年記念 シンカリオン Ｅ５はやぶさ」と記念ショット！『シンカリオン』が繋いだレールは、これからも未来へ続いていきます！

"SOUL OF CHOGOKIN GX-115 SHINKALION E5 HAYABUSA" will be available in stores on Friday, November 14, 2025!

---------------------

View Product Details(Opens in a new tab)

*The images in this article are of product samples and may differ from the actual product.
*Please refer to the instruction manual for details on the actual product's deformation and movement.